CrownSaver is the original crown repair product, developed in the early 80's. It has been time tested and is still preferred by many sweeps. CrownSaver is a blend of polymer modified hydraulic cements and powdered water repellent.
For best results, cover the crown with FormFoil, a sticky, rubber backed, aluminum foil flashing (sold separately in 9"x 50' rolls). Then, simply mix one scoop CrownSaver (measuring scoop included) with three scoops fine mason's sand and water. Next trowel over the crown at about 1/2" thickness (¼"min.-2"max). Because CrownSaver is a cement-based coating, a ½" bead of caulk should be applied to the base of each flue tile to allow for expansion.
10 Year Warranty
Strong, Cement-Based Long-Term Repair
Ready to Use
Coverage Rate: 30 sq. ft. per 5 gallons at 1/2" thickness
Available Sizes: 5 gallon pails
Application Temperatures: 40° F minimum
Application Method: Trowel, masonry finish brush
Dry Time: 4-6 hours (above 40° F).
Cleanup: Remove excess CrownSaver with a stiff nylon scrub brush and water before hardening occurs
Sold in 5 Gallon Pails, aluminum foil flashing sold in 9"x 50' rolls.
* Product, parts, color, finish, or texture may vary slightly from photos.
Welcome to CJ's Hearth & Home, the new home of ! Here you can find everything hearth, home, outdoor, and beyond. To continue your travels, please close this window or check out the sales!