10 Inch Hole Dalsin Line 18-Gauge 304 Stainless Steel 13" x 18" Support Plate

In Stock
(No reviews yet) Write a Review
Ships 1 to 2 Weeks
  • High-quality 18 Gauge Dalsin Line Support Plate
  • Applications for Wood Stove Masonry Chimney
Frequently bought together:


Product Specifications:

  • Hole Size: 10-Inch
  • Collar: 2” Collar
  • Plate Size: 13" x 18"
  • Type 304: Wood | Pellet | Oil
  • Material: 304 Stainless Steel
  • Product Type: Support Plate

The 13-inch x 18-inch, 18-gauge, 10-inch-hole support plate is a step above typical galvanized venting and is suited for relining the chimney. It has 304 and 316L fittings.


  • Continuous Laser Weld for Seamless Pipe and Superior Strength
  • 24 gauge stainless steel for durability and performance .024 Thickness
  • Type 304 is used for wood, pellet, oil, category 1 gas installations
  • 1.5 overlap at each section
  • Type 316 Stainless Steel is used for coal
  • Limited Lifetime Warranty

Note: Specify two digit hole size 6” = 06 10” = 10; 3” through 8” holes only on 1/2” collar support plates

PDF Downloads Downloads

View AllClose

Warranty Information


Manufactured by Bernard Dalsin Mfg. Co.

Bernard Dalsin Mfg. (BDM) warrants Bio Vent® Wood Pellet Venting to the original purchaser to be free from defects in material and workmanship for a period of 10 years from date of purchase, if properly installed, maintained and used. BDM will replace defective Bio Vent parts free of charge for the period of the warrantee excluding any installation / labor costs / labor to remove defective parts or shipping costs. BDM must be notified and given the opportunity to inspect parts claimed under this warranty before replacement will be considered. It is at BDM’s sole discretion to determine if the products qualify for replacement under the terms of this warranty.

LIMITATIONS: This warranty does not cover normal wear and tear, smoke damage, or damage caused by chimney fires, or any product that was purchased from anyone other than an authorized BDM dealer, retailer, or distributor.

This product must be installed for its intended purpose and in accordance with current BDM installation instructions. This product cannot be modified or altered, improperly serviced, inspected, or cleaned. Warranty is void if damage results from failure to reasonably clean, care for or maintains products in accordance with our installation instructions/recommendations.

View AllClose
Scroll to Top