12" DuraChimney II

Use your to move rafters, ridgepoles, or joists out of the way. One set of elbows for the 10"–16" DuraChimney II is optional. There can be no offsets of more than 30 degrees. Elbows aren't movable. The system is an air-cooled, and double-wall...

This is intended for use in floor or ceiling penetrations of an air-cooled chimney. This 10-inch diameter fitting fits the underside of the ceiling. This is also intended to keep you warm on the inside while keeping you cool on the outside. Product...

Debris control is essential for installations that pass through attics. The base and collar are two component pieces. It is possible to employ double-walled, air-cooled brick fireplaces. Our organization is focused on providing its customers with...

This can be used in floor or ceiling penetrations and is suitable for an air-cooled chimney. Given that it is 8 inches in size, it perfectly fits at the ceiling's base. It is intended to offer cooling outdoors as well as thermal comfort inside. Product...

This is relevant to fuel-only chimney systems. Its inner diameter is 12 inches. The chase top may be enclosed, which will help the spacer clips that are included maintain the ventilation of the air passage. It is designed to provide a warm inner airflow...

This is designed to support the weight of a 25-foot chimney and has a 10 inch diameter. Where further supplementary help is required, use it. It is intended to create a warm airflow inside while keeping you cool outside. The pipe doesn't need to be field...

This can be used to support the weight of a chimney by sandwiching it between two elbow systems for mansory fires that have a double wall and air conditioning. It is quicker since there is no longer a need for pipe field assembly thanks to the...

It helps prevent rain from delaying your pursuit. This is for a chimney system that uses air cooling. It has a 12-inch diameter and is used in conjunction with flashing and a chimney cap to create a water-resistant chimney system. The item is UL-listed...

This can't be changed. To raise the chimney once more and add sufficient support, use an elbow. These ridgepoles, joists, or rafters are divided by a 15-degree angle. At least one elbow must be restrained with elbow restraints. Product Features: Use...

This was created especially for Mansory stoves and is air-cooled and double-walled. This pipe doesn't need to be field constructed to produce a warm draft because of its unitized and lightweight design. It also keeps the cold outside. Product...

This double-wall, air-cooled product may be utilized with a fireplace Mansory. The best and highest quality are used in the 36-inch length, 12-inch inside diameter, and vent system. Field assembly of pipe components is not necessary. In situations of...

This air-cooled, double-wall construction may be utilized with a fireplace Mansory. The best and highest quality for your vent system is 18 inches in length, with a 12 inch inside diameter. Field assembly is not required for pipe component assemblies...

This seals your chimneys and shields the exhaust from the outdoors. Pipes can make it possible to alter the height of a chimney. It contains a spark arrestor, which prevents sparks from erupting from the chimney. This unitized, lightweight pipe component...

This chimney pipe was professionally built at the factory, with a cold outside and a warm airflow within. It is a high-quality, double-wall, air-cooled chimney system that works well with mansory stoves. It is available in lengths of 12, 18, 36, and 48"...

This is used to keep the chimney in place, whether it is constructed inside or outside. Only the exterior walls of the structure must be erected with wall straps every 8' to keep heat and cold inside. The twin walls allow the chimney to spread in both...

This system is one of the best and highest-quality vent system items, and it is UL-listed. It is available in four different lengths: 12, 18, 36, and 48 inches. It is intended to maintain a cold environment outside, offer a warm airflow within, and...

With a chain and a lintel hook, this serves as the foundational element of the DuraChimney II. It is attached directly and enables the fireplace to be blocked off when it is not in use. This double-walled and air-cooled, unit is utilized with fireplaces...