This 24" long stainless steel trough pan from HPC® uses a "V" shaped bottom to allow it to retain its strength while reducing the amount of fire media material needed to cover its 2' length. The surrounding 1.3" lip means that it can be dropped into a hole in order to be supported from the top.
The linear burner features a "T" shape with a 1/2" diameter and a Male Pipe Threaded (MPT) bottom. Precision drilled gas jets are laterally staggered around the length of the pipe to give the flame a more volumetric, natural-looking burn.
This complete kit also comes with a long nipple with 90° elbow, a gas valve with dual elbows and chrome escutcheon, a matching valve key, a male/male connector and a female/female connector. Assemble it in the configuration that works for you, connect to the fuel line, and it's ready to burn.
PLEASE NOTE: It is possible for the pan to warp when hot - be sure to recess the lip below the enclosure top to hide any warping (see diagram).
Benefits and features:
Proudly made in the USA!
INSTALLATION HAS TO BE PERFORMED BY A QUALIFIED INSTALLER, GAS SUPPLIER OR NFI CERTIFIED INSTALLER!
How gas jet staggering works:
In a normal gas burner, the gas jets are drilled into the top of the pipe so the the gas comes out in one direction.
The HPC® T-shaped burner features jets on multiple sides of the pipe so that the flame buffers and gives a more natural, uneven burn.
Hearth Products Controls Company warranties product against manufacturing defects that prevent safe and correct operation of the product commencing from the date of original sale / shipment from HPC. The warranty on parts and in-house labor will apply only to claims presented to us by our original customer and is in lieu of all other warranties expressed or implied. Please refer to the Warranty Chart below for warranty periods.
The defective product must be shipped back with an RMA (Return Merchandise Authorization) issued by HPC for that specific product which states the nature of the defect or warranty claim. Product to be returned should be packed carefully; HPC is not responsible for damage on returned items. The original purchase information will be required. RMAs are only valid for 30 days from the date of issue by HPC and will not be processed if received after the expiration date. The RMA number must be indicated on the outside of the return package and a copy of the RMA in the package with product.
Our warranty does not cover items that have been damaged by over heating, modification, abuse, improper storage, installation, or maintenance. This warranty excludes claims for incidental or consequential damage and indirect-collateral expenses arising from product defects or warranty recovery.
Hearth Products Controls Company is not responsible for local codes and / or if any of our products are not approved for installation. Please check with your local building department or governing agencies for proper approvals before purchasing. HPC is not responsible for the actions including negligence of the installer.
Ships as freight.
Shipping cost is included in pricing. Additional shipping may be required for areas considered "remote" by delivery services.
BEFORE PURCHASING, PLEASE NOTE THE FOLLOWING:
All deliveries will be common carrier "Curbside Delivery"
"Curbside Delivery" provides delivery made to curb at the end of the driveway. It is not the driver's responsibility to bring freight into house, garage, etc. Drivers do not assist with unpacking, set-up or clean up.
|Material||#304 Stainless steel|
|Fuel Type||Natural gas|
|Inlet Shape||Male Pipe Threading (MPT)|
|Width||5.4" (pan not counting 1.3" lip)|
|Length||24" (pan not counting 1.3" lip)|
|Additional Information||Nipple connector and valve kit with fittings included.|
Our loyal customers have left 55 company testimonials giving us an average of 5/5 stars for great service. Would you like to leave your own feedback, testimonial, or review? Leave My Feedback
Samantha was great! I forgot to email her as I promised. My doors came and they were wrong. She worked with me and stayed in contact and got the right ones delivered. She was prompt and very friendly. Mistakes happen and I didn't mind cause of how great I was treated. I tell everyone! The doors are fantastic and look great. Thanks!
Just thought I'd let you know how much we love the fireplace doors. Fit perfectly and look like they were made for our fireplace (they were!).
I just placed my 2nd order and I appreciate your excellent customer service, every time that I have needed to connect with someone I always would get an expedient reply. Thank you again.
Coal Stove Glass
Glass arrived in 4 days in a well packed box. I believe i could of thrown the box out a window without cracking the glass . Product was exactly as ordered with nice smooth edges. Than k you guys
Thank you for the quick reply. I was successful installing my fireplace door this morning by adding a couple of washers between the bracket and bolt/screw supplied. I really am thrilled with the quality, craftsmanship, and ease of installation. Maybe this tip will help others if they find themselves in a similar situation.