8 Inch Ventis Pipe

8" Ventis 304L Tee Support Section. This is an optional method of assisting with your external installation. It adjusts from 2" to 5" in length. It can support 60 feet of chimney. Product Specifications: To support exterior installation 2" - 5" of...

8" Double Wall 304L Ventis Chimney Pipe Elbow Section 30 Degree. This kit comprises two elbows and one elbow support, available in 15 and 30-degree angles, which offset impediments like building joists. In a single installation, no more than four...

8" Double Wall 304L Ventis Chimney Pipe Elbow Section 15 Degree. This kit comprises two elbows and one elbow support. available in 15 and 30-degree angles. offsets impediments like building joists. In a single installation, no more than four elbows...

304L Ventis Insulated Tee With Tee Cap Section 8" Diameter. This tee can be put on the interior or outside of a structure and is located at the base of the chimney. The accompanying tee cover is now easier to remove thanks to a one-nut driver...

8" Double Wall 304L Ventis Chimney Pipe Section 48" long. This pipe is used to exit the structure because it has narrower clearances from combustibles (2″). Product Specifications: 6" Inner Diameter Inner Wall is .016" thick and mode from...

8" Double Wall 304L Ventis Chimney Pipe Section 36" long. This pipe is used to exit the structure because it has narrower clearances from combustibles (2″). Product Specifications: 6" Inner Diameter Inner Wall is .016" thick and mode from...

8" Ventis 304L Chimney Transition Plate Section. Ventis Class-A can be connected to Forever Flex, Armor Flex, Rhino Ridge, or Hybrid in masonry chimney rehabilitation. Product Specifications: Made of 304 Stainless Steel This plate will allows you to...

304L Ventis Short Body Insulated Tee With Tee Cap Section 8" Diameter. This tee can be installed at the base of the chimney, either on the interior or the exterior of the structure. The tee features a deep bottom reservoir, which means you...

8" Stainless Steel 304L Ventis Non-Vented Metal Roof Flashing 0/12 to 6/12 Pitch. Trace the metal roof contour on the Flashing's front edge and cut for a precise fit. On the top side of the Flashing divers, the Integral Snow Wedge slides snow, ice,...

8" Stainless Steel Ventis 304L Non-Vented Metal Roof Flashing 7/12 to 12/12 Pitch. Trace the metal roof profile on the front edge of the Flashing and cut for a precise fit. The Integral Snow Wedge on the high side of the Flashing divers sliding...

8" Double Wall 304L Ventis Telescoping Chimney Pipe 14" to 22" long. This component allows the installer to have the ideal length of chimney whenever and wherever it is required. It has a changeable length ranging from 14" to 22", and its...

8" Double Wall 304L Ventis Non-Vented Standard Flashing 7/12 to 12/12 Pitch Section made of high-quality, corrosive-resistant stainless steel. Flat and a range of roof pitches are available. Product Specifications: 6" Inner Diameter 7/12...

8" Double Wall 304L Ventis Vented Standard Flashing 7/12 to 12/12 Pitch Section made of high-quality, corrosive-resistant stainless steel. Flat and a range of roof pitches are available. The pinnacle of longevity and beauty. Product...

8" Double Wall 304L Ventis Vented Standard Flashing Flat Roof Section made of high-quality, corrosive-resistant stainless steel. Available in float and many roof pitches. The pinnacle of lifespan and beauty. Product Specifications: 6"...

8" Double Wall 304L Ventis Non-Vented Peak Flashing when passing past the roof's apex. This flashing will work for you no matter what the peak is. Available in galvalume and stainless steel. Product Specifications: Use when passing through the...

8" Double Wall 304L Ventis Chimney Pipe Section 24" long. This pipe is used to exit the structure because it has a narrower clearance from combustibles (2′′). It is also used when the pipe travels outside the structure as it keeps the...

8" Double Wall 304L Ventis Non-Vented Standard Flashing 0/12 to 6/12 Pitch Section made of high-quality, corrosive-resistant stainless steel. Flat and a range of roof pitches are available.  Product Specifications: 6" Inner...

8" Double Wall 304L Ventis Vented Standard Flashing 0/12 to 6/12 Pitch Section made of high-quality, corrosive-resistant stainless steel. Available in float and many roof pitches. The pinnacle of lifespan and beauty. Product...

8" Double Wall 304L Class-A Diamond Caps Section. Similar to the Open Style Cap, but with 3/4" stainless steel screening. Product Specifications: 6" Inner Diameter Open Style Cap Contains stainless steel 3/4" screening For solid fuel...

8" Double Wall 304L Ventis Vented Peak Flashing. When entering via the roof's peak. This flashing will work for you regardless of the peak. Galvalume and stainless steel are both options. When entering via the roof's peak. This flashing will work...

8" Double Wall 430L Ventis Standard Rain Cap Section. The conventional cap allows for more open screening. A nice option for some insect prevention with minimal creosote buildup. A quick-connect clamp for quick cleaning or inspection of the...

8" Double Wall 430L Ventis Woodstyle Rain Cap Section. The conventional cap allows for more open screening. A nice option for some insect prevention with minimal creosote buildup. Product Specifications: 8" Inner Diameter More open...

8" Double Wall 304L Ventis Non-Vented Standard Flashing Flat Roof Section made of high-quality, corrosive-resistant stainless steel. Available in float and many roof pitches. The pinnacle of lifespan and beauty. Product...

8" Double Wall 430L Ventis Wide Open Rain Cap Section. The conventional cap allows for more open screening. A nice option for some insect prevention with minimal creosote buildup. A quick-connect clamp for quick cleaning or inspection of the...