This wall strap is an excellent choice to use with the DuraTech flue system. In both indoor and outdoor chimney installations, these wall straps are utilized to support the chimney construction. These units must be present for every 8 feet of chimney length that needs at least 2 to 6 inches of wall clearance. This wall strap comes in either galvanized or stainless steel.
- Approved for most fuel types
- 430-alloy stainless steel inner wall
- 2" clearance to combustibles
- ThermalTech blanket insulation eliminates hot spots
- Twist-lock connections for strong, secure fits
- Able to vent large fireplaces and building heating appliances
- Clean, smooth exterior finish
|Size:||6" Inner Diameter|
|Clearance:||2 to 6 inch combustibles|
|Use:||Ducting and Venting|
|Style:||Repair & Replacement|
|Fuel Type:||Coal, Gas, Oil, Wood|
|Product Type:||Wall Strap|
- DuraTech 5-8 Product Catalog
DuraVent, Inc. (“DuraVent”) provides this limited lifetime warranty for all of its products with the exception of Ventinox® (lifetime), and PolyPro® (ten years). Subject to the limitations set forth below, DuraVent warrants that its products will be free from defects in material or manufacturing, if properly installed, maintained and used.
DuraVent products are fully warranted if installed only by a professional installer. This Warranty is transferable from the original homeowner to the buyer of the home.
This warranty does not cover normal wear and tear, smoke damage or damage caused by chimney fires, acts of God, or any product that was:
(1) purchased other than from an authorized DuraVent dealer, retailer or distributor;
(2) modified or altered;
(3) improperly serviced, inspected or cleaned; or (4) subject to negligence or any use not in accordance with the installation instructions included with the product as determined by DuraVent.
This limited lifetime warranty applies only to parts manufactured by DuraVent.